Creams homogenizing mixer

Vacuum homogenizing mixer

  • Vacuum emulsifying mixer is mainly used for creams manufacturing, such as cosmetic cream, pharmaceutical cream, chemical cream, toothpaste, etc..
  • The ZJR Vacuum Homogenizing Mixer is composed of emulsifying pot, oil pot, water pot, vacuum unit, heating & cooling system, electric/hydraulic lifting system and electrical control system etc. The emulsifying pot is composed of the cut-off mixing pot, cut-off mixer unit, high shear dissolving homogenizer, circulating system and the stirring system etc.
  • After the materials are heated & mixed in water pot and oil pot, they are sucked into the emulsifying boiler by the vacuum pump. Adopting the middle stirrer & Teflon scrapers, the emulsifying boiler can sweep the residues on the wall of the boiler. Then the materials are cut off, compressed and folded by the blades. By the strong cutting off force and the impact and turbulent current from the high-speed shear wheel and fixed cutting case, the materials are cut off and turned to particles of 200 nm- 2 um promptly. Because the emulsifying boiler is under vacuum state, the bubbles that are produced in the course of mixing will be taken away in time.

Vacuum Homogenizing vessel

  • Introduction

Our MT Vacuum Homogenizing Vessel is widely applied in beverage, food, dairy, pharmaceutical, chemical and process industries. For saving cost, vacuum emulsifying vessel is mainly used for creams, paste, lotions, etc.. It can make according to customer’s requirement for the structure, single-layer, double-layer(jacket) and three-layer(insulation layer) or make limpet coil(inside or external ) to heat and cold. The series of SS. Mixing tanks are made of stainless steel (SUS304 or SUS316L). All joints and inside is mirror finished without any dead angle and cleaned easily. It consists of inner vessel, jacket and insulation with the configurations of agitator, CIP hole, Manhole, sight glass, thermometer etc. 

  • Applied range: 

Daily use industry-toothpaste, detergents, shampoo, shoes polish, soap, fragrance etc

Chemical industry-Painting, pigment, dyes, paints, adhesives detergents etc

Cosmetic industry-face cream, hand cream, sunscreen cream, eyelash to cream, hair gel, lotion, bath shampoo, nail polish. 

Pharmaceutical industry– ointments, syrup, nutrition, bio-products, paste of pharmaceutical etc.

Food industry – sauces, jam, chocolate, butter, vegetable proteins, animal proteins etc.  

  • Characteristics

1It is sealed type, and the material contacting the liquid is the stainless steel 304 or 316L 

2 Quick open type manhole 

3 A self-rotating type cleaning

Multi-shaft mixer

  • It is for high viscosity creams which can not flow easily. The max. viscosity can be 1,600,000cps.
  • The shaft quantity can be recommend according to materials feature or customers’ requirement.
  • The mixer can be slow speed stirrer, but also can be high speed dissolving disperser or homogenizer.
  • Application: coatings, paint, inks, pigment, sealant, plastic sol, binder, etc..

Leave a Comment

Your email address will not be published. Required fields are marked *