Two nozzles tube filler sealer

SGF-100 auto two nozzles tube filler sealer

Introduction

SGF-100 Two nozzles tube filler sealer is for filling and sealing of plastic tubes. Double production capacity of one nozzle SGF-50 auto plastic tube filling sealing machine. The control parts of SGF-100 Two nozzles tube filler sealer are composed of intelligent man-computer interface, large touch screen display/operation control panel, including temperature setting, motor speed, filling speed, direct screen display and screen control. The components of the machine which touches the filling material are made of stainless steel SUS304 or SUS316L. Transparent cover, feeding hose, feeding device are also supplied with the machine. The machine is featured with safety switch, auto-stop, soft tube positioning, photoelectric sealing control etc. During the process, hose-feeding and setting, filling and sealing, ejecting are all automatically controlled. Digital count device is installed at the low front part of the machine. During filling process the filling head is put inside the material pot to avoid air-entrance. For high viscosity filling material, blow-off device is installed to ensure a complete sealing.

The heating part of SGF-100 Two nozzles tube filler sealer adopts inner heating mode by using LEISTER air-heater imported from Switzerland, which melt down plastic stuff by puffing hot air to the in walls of tubes from the back ends leading to high-quality sealing when stamping and batch numbers afterwards. The station rotation adopts precise cam indexing mechanism for precise and smooth positioning. The user can adjust speed with the frequency conversion type speed control to the rotating engine.

For laminated tubes, there is electric heating for choice for cutting down the cost. Two color filling is available.

Parameters

ModelSGF-100
PowerSupply: 380V / 3 Phase / AC / 50 Hz
Main Power3.5 kw
Produce speed80-100(tubes/min)
Adopt to the tube diameterPlastic and laminated tube:10-50mm
Filling capacityPlastic:5-250ml
Filling precision≤+/-1%
Air pressure0.5-0.7 MPa